CM2 SP2 v2.13
CM2 SP2 v2.13 is a small tool that helps you to write stock ROM for your SpreadTurm (SPD) powered devices. The tool also allows you to reset the screen and FRP (Factory Reset Protection) lock. CM2 SPD2 is the best tool for SPD powered devices.
On this page, We have collected to share the official CM2 SPD2 setup file (Windows 64 and 86 bit) for your device for Flashing, Unlocking, and Repairing.
Download CM2 SP2 v2.13
CM2 SPD2 Module allows you to flash the Pac based flash file ROM (Firmware) on your SpreadTurm Powered Smartphone and Tablets.
File Name : InfinityBox_install_CM2SP2_v2.13.zip
File Size : 45 MB
Operating System : Windows
How to Download : See Example
How To Work?
Extract : Download and extract the package. After extracting you will see the tool and driver.
Install : Install CM2 SP2 v2.13 on your computer.
USB Driver : Install SPD USB Driver on your computer.
Write Firmware : Open the tool > Go to Flasher tab > Choose Firmware > Click on Flash > Connect your device in Flash Mode (Vol+ and Vol-).
Reset FRP : Open the tool > Go to Service tab > Choose FRP> Click on Formar FS > Connect your device in Flash Mode (Vol+ and Vol-).
Reset Screen Lock : Open the tool > Go to Service tab > Click on Formar FS > Connect your device in Flash Mode (Vol+ and Vol-).
Readme once
[*] Take a Backup : After using the CM2 SP2 v2.13 your personal data will be deleted so take a backup your personal data before using the tool.
[*] Requirements : It is not any crack tool, so you must need a CM2 box/dongle to run the tool.
[*] Virus status : We have scanned the tool using Kaspersky antivirus before sharing it online.
[*] USB Driver : If you are looking for SPD USB Driver then click here to Download SPD USB Driver.
[*] Alternative Tool : There are several alternative tools are available that allows you to flash stock firmware on your SpreadTurm based devices including CM2 SPD Tool, Avenger SPD Tool, and NCK SPD Tool.
